Search results
Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try! Get information about Sodium hydroxide (dry, solid) NaOH and fitting detectors and PPE. testing, monitoring protective equipment 1500+ substances ...
Spot gas measurement for more than 500 different gases. Short measurement time: between 5 seconds to 15 minutes. Dräger gas detection tubes have proven to be a very cost-effective and reliable method for the measurement of gases. Play video.
People also ask
Can colorimetric reagent tubes be used for gas detection?
How do colorimetric gas detection tubes work?
What are detector tube standards?
What is a detector tube?
Dräger-Tubes with direct reading colorimetric indication have many applications. Approximately 500 different substances can be measured with Dräger-Tubes. Limited selectivity and the fact that Dräger-Tubes are usually capable of only being used a once may present a disadvantage. If repeated measurements of the same substance are to be
Connect one end to the pump and the other end to the tube holder. This enables you to place the tube at the measuring location, such as at the bottom of a tank. For the Dräger X-act® 5000, Dräger offers hoses made of fuel-resistant, synthetic natural rubber in the following lengths: 3.28 ft./1 m. 9.84 ft./3 m.
The single-use colorimetric gas detection tubes change color in direct correlation to the concentration of gas present. No calibration is required, and the ergonomic pump can be used even with multiple layers of gloves. Features and Benefits: Compound-specific measurement of toxic gases and vapors. Single-use.
and economical, gas detection by colorimetric reagent tubes can be a timely solution in many cases. The Dräger reagent tube measurement system includes over 200 reagent tubes for precise spot measurements of more than 500 gases and vapors. These tubes are used in combination with the Accuro manual pump or the X-act® 5000 automatic pump. They ...
IDENTIFICATION (SODIUM)_____ _____PASSES TEST: 7.2.5.1. Pipette 1mL of sample into a test tube containing 25mL of purified water. 7.2.5.2. Add 2mL of 15% Potassium Carbonate and heat to boiling 7.2.5.3. Allow to cool in ice bath and as necessary, rub the inside of the test tube with a glass rod to initiate precipitation 7.2.5.4.
