Search results
Position the Wall Mount. Hold the flat screen wall mount or TV mount brackets up against the wall, and use a level to make sure it’s even. Use a friend to help you hold the wall mount. Use a drill to make pilot holes into studs along where you’ve made the marks for mounting. Tip: Remember the old adage, “Mark twice.
- When choosing a TV mount. Most flat screen TVs are made to be mounted, but make sure yours is before you shop for a mount. Look for “VESA” (Video Electronics Standards Association) on the manual or the TV itself, followed by a number like “VESA 75.”
- Proper TV height. I decided to mount a 42-inch TV in my bedroom above a credenza. So I purchased a full motion mount in case I wanted to pull the TV away from the wall and tilt the screen for better viewing.
- Find your studs. Next, locate the centers of the wall studs using a stud finder. The centers of the studs provide maximum holding power. Mark the location with a pencil.
- Position wall mount. Most wall plates let you slide the TV left or right a few inches, so the plate doesn’t have to be perfectly centered. But positioning the plate at the right height can be tricky.
- Choose the Right Spot for Your TV. Decide where you want to hang your TV before you go shopping for a mount, because that will affect the type of hardware you choose.
- Get the Right TV Mount. First, you need to decide what style of TV mount to shop for. (We tried several mounts in various styles, and found them all easy to install and use.)
- Locate the Wall Studs. We’re going to assume you’re mounting the hardware on a wall with studs and drywall. The first step in the installation is to gather a few tools.
- Mark and Drill Pilot Holes. Once you’ve found the studs, it’s time to mark the locations to drill small pilot holes for your mounting screws or lag bolts.
Jan 2, 2022 · Stand your flat-screen TV stand upright and check its adjustability. Assemble the stand according to the instructions and place it in the area with the best viewing angle. TV mount stands are of many kinds but the assembly process for any mount TV stand remains generally the same. Step 4
- 3 min
- Overview
- Getting and Planning Your TV Mount
- Mounting Your TV on Studs
- Using Toggle Bolts for Studless Walls
- Using Toggle Bolts for Studless Walls
Mounting a TV on your wall can create a theater-like experience in your room without using an entertainment center. While it may seem tricky to hang a TV on drywall, there are a few ways to make sure it stays secure without it falling down. Once you get a mount that works with your TV, check if there are studs behind your drywall. If there are, then you can screw the mount directly into the studs. Otherwise, you’ll have to use toggle bolts so the TV doesn’t fall out. Once you’re done installing the mount, you’ll be able to comfortably watch your new TV!
Purchase a TV mount compatible with your TV size and type. Screw the mount's brackets onto the holes on your TV.
Find and mark two studs. Hold the mount to the wall to mark the holes. Pre-drill holes into the marks.
Drill the mount into the wall, and then hook the TV onto the mount. Stand back to check its final position.
Get a mount made for the weight of your TV.
There are many different types of mounts you can get, but they need to be compatible with your TV and support its weight. Check the weight of your TV in its instruction manual or on the box, and write it down so you don’t forget. Search for TV mounts online or at electronics stores for one that fits the size of your TV.
If you want to ensure the mount is compatible with your television, search online for its model number followed by “mount” to find lists of compatible styles. Otherwise, you can get a universal mount that works with multiple styles of TVs.
Full-motion mounts allow you to tilt and turn the TV screen so you can position it however you want it.
Set mounts don’t turn, but you may be able to adjust the direction it tilts up or down.
Screw the mount’s bracket into the holes on the back of your TV.
Mark 2 studs on your wall where you plan to hang the TV.
Use your stud finder to locate 2 adjacent studs in the spot where you want to mount your TV. Once you find the 2 studs, use a pencil to mark them at the height you found earlier for the viewing angle. Check that your marks are the same height using a straightedge or a level.
If the studs don’t line up where you want to place your TV, then you’ll have to mount the TV without studs
Some mounts can be attached to a single stud.
Hold the TV mount against the wall to mark the holes.
The part of the mount that connects to the wall will have multiple holes on the top and bottom. Put the mount against your wall so it’s level and mark the holes that line up with the studs. Pull the mount off of the wall and check to make sure the marks are level again.
Position the TV mount and mark where you want to place the holes.
Hold the mount against the spot on your wall that lines up with your viewing height you found before. Look at the holes on the top of the mount and choose 3 of them that are evenly spaced apart to make your marks. Mark 2 end holes on the bottom of the mount for the bottom support screws. Remove the mount from the wall and check if your marks are level.
Since you don’t have studs to use for support, you need to use more screws to mount the TV to evenly distribute its weight.
in (0.64 cm) holes into the drywall on the marks.
in (0.64 cm) to the end of your drill and make sure it’s tightened. Hold the drill against one of the marks you made so the bit is horizontal and drill through it. Continue drilling through the drywall at each of your marks.
inch (0.64 cm) toggle bolts into each of the holes.
This article was co-authored by
and by wikiHow staff writer,
Jason Phillip is a handyman specializing in mounting and hanging objects onto walls. With over five years of experience professionally mounting and installing objects through his company, Jason's Handyman Services, Jason's work includes working with mounting window AC units, designing art gallery walls, installing kitchen cabinets, and replacing light fixtures on drywall, brick, and plaster. He has been rated a "Top Pro" every year since 2016 by Thumbtack for being one of the highest-rated, most popular professionals on Thumbtack. This article has been viewed 393,471 times.
Appendere una TV a Schermo Piatto alla Parete
Dec 8, 2022 · Drill pilot holes of the diameter given in the instructions. 1. Place the mounting bracket on the wall and screw in the lag bolts using a socket wrench or plyers. To assure that it will be level, mount it with one lag bolt and check if it is level. Check if any pilot holes should be re-drilled.
- 660.8K
People also ask
How do you mount a TV on a wall?
How to mount a flat-screen TV stand?
Can a flat screen TV be mounted?
How do you mount a TV stand?
Dec 7, 2022 · First, place the bracket flat against the wall, lining up one screw location with the first marked hole. Keeping that point firm, pivot the other side of the bracket as needed to line up with the ...
