Search results
Typical Electric – Hydraulic Brake System Diagram. Breakaway Switch E/H Actuator Trailer Plug Electric Wires Hydraulic lines to trailer brakes Dexter hydraulic drum brake or disc brake Electric Brake Controller Breakaway Battery. Dexter Axle E/H Units. Model E/H 1000 P/N K71-650-00 for Drum Brakes Only Model E/H 1600 P/N K71-651-00 for Disc ...
- 152KB
- 2
Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the breakaway battery. Blue - Output from in cab controller, The wire that provides power from your brake ...
When adjusting trailer brake assemblies like the Dexter 7k set part #23-180-181 you want to tighten them down till there is a light drag on the wheel as you turn them by hand. To see how to manually adjust trailer brake assemblies check out the video… view full answer...
Confirm that trailer is safely equipped and supported at all times during installation, maintenance, or repair. After every hookup, test and confirm the trailer brake system is operating correctly before transportation on roads. Before each towing, perform these steps: 1. Check brake fluid reservoir is within 3/8” from filler opening of
This manual has been provided to guide you through the process of installing, operating, and maintaining your Dexter E/H 1000 or E/H 1600 hydraulic brake system actuator. This electrically powered unit has been designed and manufactured to give safe, reliable power to your hydraulic trailer brakes.
Ensure that the trailer battery is fully charged or that a charging device is connected to the trailer. Connect the +12V to the black wire on the DSC and ground the white wire from the DSC. Connect a brake controller to the brake signal (blue) wire of the trailer harness.
