Search results
- To set the timing on that engine, have the s/plugs out, and have the throttle at full, set that timer base under the flywheel tight against the rubber stop on the end of the full spark timer advance stop screw (wire it against that stop if necessary). Rig a spark tester and have the gap set to 7/16". Hook up the timing light to the #1 plug wire.
forums.iboats.com › threads › joe-reeves-wot-timing-procedure-verifiedJoe Reeves WOT timing procedure Verified | Boating Forum ...
Nov 15, 2007 · To set the timing on that engine, have the s/plugs out, and have the throttle at full, set that timer base under the flywheel tight against the rubber stop on the end of the full spark timer advance stop screw (wire it against that stop if necessary). Rig a spark tester and have the gap set to 7/16". Hook up the timing light to the #1 plug wire.
- Honorary Moderator Emeritus
May 1, 2019 · To set the timing on that engine, have the s/plugs out, and have the throttle at full, set that timer base under the flywheel tight against the rubber stop on the end of the full spark timer advance stop screw (wire it against that stop if necessary).
I would therefore recommend the Joe Reeves Method as initial setting only, so test runs can be made safely until the timing can be set with a timing gun. Or as safest option if no other option for setting the timing is available.
Jul 23, 2020 · To set the timing on that engine, have the s/plugs out, and have the throttle at full, set that timer base under the flywheel tight against the rubber stop on the end of the full spark timer advance stop screw (wire it against that stop if necessary). Rig a spark tester and have the gap set to 7/16". Hook up the timing light to the #1 plug wire.
Sep 8, 2006 · To set the timing on that engine, have the s/plugs out, and have the throttle at full, set that timer base under the flywheel tight against the rubber stop on the end of the full spark timer advance stop screw (wire it against that stop if necessary). Rig a spark tester and have the gap set to 7/16".